Metallo XXL – Tool trolley with tools, 12 drawers, top cabinet, EVA

12 drawers. Top cabinet. 10 tool modules included. A ready-to-go workstation in a single cart.

Wasting time looking for tools all over the workshop and piecing them together one by one? This cart solves that in one go: 12 drawers, a top cabinet and 10 tool modules arranged in EVA foam inserts. You open the drawer — the tool is in its place. A steel body, a wooden worktop and casters turn it into a mobile workstation that rolls to wherever you happen to be working.

Why this cart?

• ✓ A ready workstation from day one — 10 tool modules already inside, you don't assemble anything separately
• ✓ You never search for a tool — each one has its cut-out spot in the EVA foam, anything missing is visible at a glance
• ✓ You work where you need to — the cart on casters rolls up to the car, to the workstation, under the lift
• ✓ A second work surface — the wooden worktop on top withstands parts set down on it and light assembly work
• ✓ The most-used tools within reach — the top cabinet with a perforated panel (pegboard) keeps them in view
• ✓ Tools secure after work — a lockable steel body
• ✓ Room to spare — 12 drawers hold the set and your own tools

Specification:

• Model: METALLO-12HS10G-H (XXL Edition, with top cabinet)
• Number of drawers: 12 + top cabinet
• Worktop: wooden
• Top cabinet: with a perforated panel (pegboard)
• Casters: 4 (front swivel)
• Tool inserts: EVA foam with tool outlines
• Net weight: 106 kg
• Packaging dimensions: 105 × 52 × 88 cm
• Finish: black / blue accents

Contents — 10 tool modules (EVA inserts)

1. 1/4" and 1/2" sockets with ratchets and a torque wrench

An extensive drive module: 1/4" and 1/2" sockets (hex, short and long), spark plug sockets (17/19/21), bit sockets (HEX, Torx, Spline, Phillips, Pozidriv, flat, Torx E), extensions 50/100/125/250 mm, universal joints 1/4" and 1/2", drivers (L-handle, sliding, spinner), ratchets 1/4" and 1/2" and a 1/2" torque wrench.

2. Combination wrenches + hex keys (HEX)

A set of combination wrenches across a wide range of metric sizes plus a set of hex keys (HEX) in a folding case.

3. Offset double-ring wrenches + L-type Torx keys

Double-ended ring wrenches, offset (from 6×7 to 30×32 mm) — 12 pcs, complemented by a set of long L-type Torx keys (from T8 to T70).

4. Screwdrivers — large set

A set of slotted (SL), Phillips cross (PH) and Torx (T) screwdrivers in various lengths, with ergonomic two-component handles.

5. Torx screwdrivers with a T-handle

Torx T-handle keys with a comfortable T-grip: T10, T15, T20, T25, T30, T40 — full torque control when working one-handed.

6. Pliers + measuring tools

Segera pliers (for retaining rings) — 4 pcs (internal/external, straight/bent), side cutters 7,5", long-nose pliers (needle) 8", combination pliers 8", water pump pliers (adjustable) 10", locking pliers 10", caliper, pick-up tool and a 3 m tape measure.

7. VDE 1000 V set (insulated)

Combination pliers 7", long-nose pliers 6", side cutters 6", slotted and cross screwdrivers (SL3×75, SL4×100, SL5,5×125, PH0×75, PH1×80, PH2×100) and a voltage tester — insulated tools for live working.

8. Electrical set — connectors + wire stripper

A set of insulated electrical connectors (red, blue, yellow) in sorted compartments plus a tool for stripping insulation and crimping connectors (stripping plier).

9. Punches, chisels and files

A set of punches (centre punches) and locksmith chisels in various sizes plus a set of workshop files with handles.

10. Hammers

Three hammers for different jobs: dead blow 800 g, locksmith 500 g and a rubber assembly mallet 40 mm.

Who is it for?

This is a ready-to-go workstation for car mechanics, service technicians, workshops and service stations across Europe. One purchase replaces dozens of individual tool purchases — you open a drawer and get to work.

FAQ — Frequently asked questions